Fisher Scientific 650F Incubator, Thermo Fisher Scientific (CAT#: STEM-CC-2166-LGZ)

The manufacturer of Fisher Scientific 650F Incubator is Thermo Fisher Scientific. Model is 650F. Average temperature uniformity is ±0.3 °C (±0.5 °C absolute), and these incubators operate within tighter tolerances than gravity convection incubators.

Condition: used
Temperature range: 5 to 75°C
Capacity: 4.5 cu ft, 127.4L
Material: Steel/aluminum
Interior Dimensions: 17 x 18 x 25.5 in.
Exterior Dimensions: 26 x 23.5 x 39 in.

1. Built-in PID microprocessor controller, the temperature is uniform.
2. The temperature can be set up to 75 °C in 0.1 °C increments using the keys on the control panel.
3. The LED display is bright three digits and can show the actual temperature (closest to 0.1 °C).
4. If the actual temperature exceeds the set value by 3 °C, the control panel will issue a visual alarm signal.
5. Tempered glass inner door, you can view samples.
6. Body temperature can be recovered within 2 minutes.
7. Heavy duty steel/aluminum finish; stainless steel interior, 3 inches. Thick (7.6cm) walls and 1.5" insulation. (3.8 cm) on the door.
8. 5 amp power outlet supports other devices.

Fisher Scientific Single Heat Block Dry Bath Incubator, Thermo Fisher Scientific(CAT#-STEM-CC-0495-LGZ)
Eppendorf Thermomixer C Thermomixer, Eppendorf(CAT#-STEM-CC-0501-LGZ)
Eppendorf ThermoStat C Thermomixer, Eppendorf(CAT#-STEM-CC-0502-LGZ)
Baker INC001 CO2 Incubator, Baker(CAT#-STEM-CC-0903-LGZ)
Fisher Scientific 230D Incubator, Thermo Fisher Scientific(CAT#-STEM-CC-1159-LGZ)
Fisher Scientific 625D Incubator, Thermo Fisher Scientific(CAT#-STEM-CC-1163-LGZ)