Filter Fan Unit SILENT, 1,200×1,200 mm, Exyte (CAT#: STEM-C-0550-ZJF)

Filter Fan Unit SILENT manufactured by Exyte provides air filtration for cleanrooms, with uniform airflow and super low noise.
The symmetric construction of the noise absorbing internal flow fixtures keeps downstream air velocity consistent, reducing noise significantly.
The unit is suitable for applications in unidirectional (laminar) airflow cleanroom areas with advanced requirements of downstream air velocity uniformity and noise level.
Cleanroom classes ISO 1.0 to ISO 8.0 according DIN EN ISO 14644-1 can be achieved.

Grid size: length: 1,200 mm | width: 1,200 mm
Housing length: 1,132 mm
Housing width: 1,132 mm
Housing height: 440 mm
Weight: without filter: 45 kg
Voltage: between 200 V and 277 V
Phase: 1 ~
Frequency: 50 Hz / 60 Hz
Rated current: between 1.8 A and 1.3 A
Rated capacity: Modbus (Alu 3D): 370W | MW Bus (RadiCal): 320W | Modbus DCI (RadCial): 320W | Modbus RTU (RadiCal): 500W
Number of revolutions: Modbus (Alu 3D): 296 – 1304 min-1 | MW Bus (RadiCal): 296 – 1248 min-1 | Modbus DCI (RadCial): 125 – 1250 min-1 | Modbus RTU (RadiCal): 145 – 1450min-1
Operating temperature: min.: 0 °C | max.: 40 °C
Flow velocity: 0.45 m/s
Air volume flow: 2,330 m³/h
Differential pressure: 120 Pa
Power consumption: 195 W
Sound power level: pressure side: 52 dB (A)
Clean room sound pressure level: 100 % occupancy: 58 dB (A)
External pressure difference: Modbus (Alu 3D): 275Pa | MW Bus (RadiCal): 265Pa | Modbus DCI (RadCial): 265Pa | Modbus RTU (RadiCal): 370Pa

Particle Filter (All Filters are Filter with dry sealant. Filters with fluid sealant are available upon request.)
AMC Filter for filtration of gaseous contaminants
Prefilter for coarse particle filtration (Prefilter incl. Filterframing made in Aluminium)
Diffusors for air distribution (Diffusor Aluminium anodized and Aluminium powder coated)
Installation Frame for third Party Ceiling Systems (Filter Installation Frame Aluminium anodized and Aluminium powder coated)
Cooling Coil
Aerosol Measurement Connector

Highest cleanroom classes
Energy efficiency
Low noise due to optimized airflow and acoustic design
Easy operation
Low maintenance costs
Best performance with low price
HEPA / ULPA filter classes H13 to U17
Consistent filter downstream air velocity
Cleanroom classes 1 to 8 in accordance with ISO 14644-1
Cleanroom classes D, C, B, A in accordance with EU Good Manufacturing Practice guideline
Housing with integrated return-air conveyance
Easy installation with plug & play cable system and bearing rails
Installation from plenum side optional
Particle and differential pressure measurement

Filter Fan Unit COMPACT, 1,200×600 mm, Exyte
Filter Fan Unit CWIC©, 1,200×600 mm, Exyte
Filter Fan Unit ECO2, 1,200×1,200 mm, Exyte
Filter Fan Unit IRC, 1,200×1,200 mm, Exyte
Filter Fan Unit LIGHT, 1,200×1,200 mm, Exyte
Filter Fan Unit PIFF, 1,200×1,200 mm, Exyte
Filter Fan Unit PIFF COMPACT, 1,200×1,200 mm, Exyte
Filter Fan Unit RETURN AIR, 1,200×1,200 mm, Exyte