EvoDent S200 DLP 3D Printer, Build Volume: 192 × 108 × 200 mm (CAT#: STEM-TDP-0049-LC)

Build Volume: 192 × 108 × 200 mm, 7.56 × 4.25 × 7.87 in
Accuracy: ±0.05 mm
Layer Thickness: 0.05 mm
Print Speed: 40 mm/h
Pixel Size: 50 μm
Resolution: 3840 × 2160 HD
Wavelength: 405 nm
Projection Mode: Bottom-up Projection
Controlling Software: UnionTech™ DSCON
Data Preparation Software: Polydevs
Operation System: Windows 10
Network: WiFi, Ethernet, Using MQTT, HTTP, TCP, UDP, FTP
Electrical Requirements: 200-240 VAC, 50/60 Hz
Rated Power: 800W
Systems Control: Closed-loop
Temperature Range: 22–26 °C (72–79 °F)
Maximum Change Rate: 1 °C/hour
Relative Humidity: < 40%
Resin Vat: Replaceable
Machine Dimensions: 600 × 510 × 1450 mm
Machine Weight: 120 kg
Processing and Finishing: Post-Curing Unit (optional)
Warranty: 12 Months

Ultra-high accuracy with horizontal resolution up to ±30μm.

Ultra-stable with over 15 days without any deformation.

A full-plate printing in just one hour.

6-12 full arch dental models in one print.

Automatic power correction to achieve better finish quality.