Dry Block Incubator DH300/DC10, Ambient -30 to 100 C (CAT#: STEM-AL-6545-ZJF)

Dry Block Incubator DH300/DC10 is a temperature-controlled laboratory incubator for dry heating of samples and compatible vessels. It is intended for biochemical incubation, sample preparation, preservation, and reaction workflows. Temperature regulation is managed electronically to maintain a defined thermal environment during operation. The design avoids the use of an open water bath and supports routine laboratory handling. Compatible blocks, modules, or sample positions are selected according to the vessel format specified for the model. Programmable timing and temperature functions support repeatable incubation procedures where provided. Integrated control and protection functions help maintain stable operation during extended workflows. The instrument is suited to laboratory processes that require controlled heating with a compact benchtop format.

Model: DH300 | DC10(with cooling)
Temperature Setting Range: 0 C-100 C | -10 C-100 C
Temperature Control Range: Ambient +5 C-100 C | Ambient -30 C-100 C
Timer Range: 1min - 99h59min/∞
Temperature Accuracy: ≤±0.3 C
Display Resolution: 0.1 C
Temperature Uniformity: ≤±0.3 C
Heating Time: ≤12 min(25 C 100 C) | ≤12 min(25 C 100 C)
Cooling Time 1: -- | ≤10 min (100 C 25 C)
Cooling Time 2: -- | ≤25 min(Ambient Ambient -30 C)
Multi-Point Program: Supported, max 5 )
Multi-Point Cycles: Supported, max 99 cycles)
Automatic Preheating: Supported
Auto-Run at Power-On: Supported
Power-Loss Recovery: Supported
Sample Capacity: accessories
Input Power: 150W
Voltage: AC220V/50-60HZ | AC110-220V/50-60HZ
Fuse: 250V 3A phi5x20
Overall Dimensions: 260x195x150 mm
Weight: 2.5Kg | 4.5Kg
Optional Module: wells diameter | notes
MD30: 96x0.2ml( PCR plate) | 0.2ml PCR plate
MD31: 54x0.5ml( centrifuge tubes) | standard centrifuge tubes
MD32: 35x1.5ml( centrifuge tubes) | standard centrifuge tubes
MD33: 35x2.0ml( centrifuge tubes) | standard centrifuge tubes
MD34: 15x0.5ml+20x1.5ml( centrifuge tubes) | standard centrifuge tubes
MD35: 96x0.2ml( microplate) | 96 wells microplate
MD36: 24x5ml ( centrifuge tubes) | standard centrifuge tubes
MD37: 15x10ml ( centrifuge tubes) | standard centrifuge tubes
MD38: 12x15ml ( centrifuge tubes) | standard centrifuge tubes
MD39: 6x50ml ( centrifuge tubes) | 50mlround bottom centrifuge tubes
MD39-S: 6x50ml ( centrifuge tubes) | 50mlconical bottom centrifuge tubes
RC02C00011: 32*0.2ml+12*0.5ml+15*1.5ml

Electronic temperature control
Programmable incubation timing
Dry heating without an open water bath
Interchangeable or format-specific sample support
Temperature calibration support
Benchtop sample-incubation design
Integrated thermal protection