Dionex Ultimate 3000 DGP HPLC Pump, Thermo Fisher Scientific (CAT#: STEM-C-0290-LGZ)

The manufacturer of Dionex Ultimate 3000 DGP HPLC Pump is Thermo Fisher Scientific. Model is UltiMate 3000 DGP. The Thermo Fisher/Dionex UltiMate 3000 DGP-3600MB pump is a dual low pressure gradient pump for micro flow. Two separate pumps are mounted in one housing (2 x 3 solvent). The pump has no mixing chamber. This pump is biocompatible.

Condition: used
Recommended Flow Rate: 10-2500 µL/min
Flow Rate Accuracy: +/-0.5% at 200 µL/min
±0.5% at 200 μL/min
(typical ±0.25% at 200 μL/min)
Flow rate precision: <0.05% RSD or <0.01 min SD, whichever is greater
Pressure range: 2-50 MPa (7250 psi)
Pressure ripple: Typical <0.2 MPa or <1%whichever is greater
Proportioning accuracy: ±0.2% of fullscale
Proportioning precision: <0.5% SD at 200 μL/min
No. of eluent lines: 6 (2 x 3)
Grad. delay volume: 230 μL
Solvent degassing: External (optional)
Dimensions (h x w x d): 19 x 42 x 51 cm
PC connection: All functions controllable via USB 1.1; integrated USB hub with three free USB ports
I/O interfaces: 3 digital inputs, 4 programmable relays, 1 analog output for pressure monitoring
15-pin D-Sub connector for Solvent Rack/degasser connection
Safety features: Leak sensor
Active rear seal washing with monitoring of the piston seal tightness and the liquid level of the liquid reservoir
User input/display: LCD indicating system parameters, Standby button, 3 LEDs (Power, Connected, and Status) for status monitoring, 4 function keys for operation during initial installation and maintenance
GLP: In Chromeleon: Full support of automatic equipment qualification (AutoQ) and System Wellness monitoring.
All system parameters are logged in the Chromeleon Audit Trail
Wetted parts: Stainless steel or titanium (for biocompatible pumps), sapphire, ruby, UHMW polyethylene, PCTFE, PTFE, PEEK, zirconium oxide, aluminum oxide, FEP, ECTFE
Emission sound pressure level: ion sound pressure level:< 70 dB(A) in 1-m-distance
Environmental conditions: Range of use: Indoor use; Temperature: 10 °C to 35 °C; Air humidity:80% relative humidity, non-condensing; Overvoltage category: II; Pollution degree: 2

1. Part of the UltiMate 3000 system.
2. For routine HPLC analysis, it can be used in various laboratory environments.
3. A responsible module analysis and complex research tasks.

Agilent 1100 Series - G1312A HPLC Binary Pump, Agilent Technologies(CAT#-STEM-C-0033-LGZ)
Agilent 1100 Series - G1361A HPLC Preparative Pump, Agilent Technologies(CAT#-STEM-C-0046-LGZ)
Agilent 1100 Series - G1376A HPLC Capillary Pump, Agilent Technologies(CAT#-STEM-C-0053-LGZ)
Agilent 1200 Series - G1311A HPLC Quaternary Pump, Agilent Technologies(CAT#-STEM-C-0063-LGZ)
Agilent 1200 Series - G1312A HPLC Binary Pump, Agilent Technologies(CAT#-STEM-C-0064-LGZ)
Agilent 1200 Series - G1312B HPLC Binary Pump, Agilent Technologies(CAT#-STEM-C-0065-LGZ)