Unlock Exclusive Discounts & Flash Sales! Click Here to Join the Deals on Every Wednesday!

DC150-1A Pore Nitrogen Blower, +5°C ~150°C, YOONING (CAT#: STEM-GLE-4094-LGZ)

Highlights

1. The gas needles are independent of each other and will not cause cross infection.
2. Each gas needle corresponds to the hole position of the module vertically, and the adjustment is intuitive and convenient.
3. The system has high temperature control accuracy, wide temperature control range and convenient temperature calibration.

Cat Number: STEM-GLE-4094-LGZ

Application: Mainly used for sample concentration or preparation (such as sample preparation in drug screening, hormone analysis, liquid phase, and mass spectrometry).

Model: DC150-1A

Add to Cart



Description

The DC150-1A 96-hole nitrogen blowing instrument is a multi-channel sample concentration device combining a PID temperature-controlled metal bath and a nitrogen purging device. The solvent evaporation rate and boiling point of the concentrated sample, and the heating temperature can be set to achieve rapid concentration of batch samples. The instrument adopts aluminum heating module, which has good heat transfer and uniform heat transfer, which is conducive to rapid heating and rapid temperature control. Nitrogen gas is blown onto the sample surface to achieve an oxygen-free concentration of liquid samples.

Specification

Temperature control range: room temperature +5°C ~150°C
Heating time: ≤ 30 min (from 20°C to 150°C)
Temperature Stability @40°C: ≤±0.3°C
Temperature Stability @100°C: ≤± 0.5°C
Temperature Stability @120°C: ≤± 1°C
General configuration module: 1 piece
Timing time setting: 0~99h59m
Nitrogen flow: 0~12L/min
Nitrogen pressure: ≤0.2MPa
Dimensions (W×D×H): 220×290×540 (mm)
Maximum power: 400W

Features

1. The gas needles are independent of each other and will not cause cross infection.
2. Each gas needle corresponds to the hole position of the module vertically, and the adjustment is intuitive and convenient.
3. The system has high temperature control accuracy, wide temperature control range and convenient temperature calibration.
4. The lifting mechanism has safety protection device, which is safe to use.
5. The lifting mechanism has scale display, and the positioning is accurate and clear.

Related Products

DN-12A Nitrogen Blower, Room Temperature~150°C, BiLon(CAT#-STEM-GLE-4097-LGZ)
DN-24A Nitrogen Blower, Room Temperature~150°C, BiLon(CAT#-STEM-GLE-4098-LGZ)
DN-36A Nitrogen Blower, Room Temperature~150°C, BiLon(CAT#-STEM-GLE-4099-LGZ)
DN-48A Nitrogen Blower, Room Temperature~150°C, BiLon(CAT#-STEM-GLE-4100-LGZ)
DN-12W Water Bath Nitrogen Blower, Room Temperature~99°C, BiLon(CAT#-STEM-GLE-4101-LGZ)
DN-24W Water Bath Nitrogen Blower, Room Temperature~99°C, BiLon(CAT#-STEM-GLE-4102-LGZ)