Continuous-Flow Hydride Generator HG3000PII, 60 Samples/h (CAT#: STEM-AL-9655-ZJF)

The HG3000PII is a continuous-flow hydride generator for elemental analysis. The source lists Sb, As, Bi, Ge, Pb, Se, Te, and Ti as hydride-forming target elements. The same system can be used for mercury analysis by a cold-vapor method. The listed analytical capability reaches the ppb concentration range for the target elements. Continuous flow allows the analytical signal to be integrated rather than measured only as a short transient peak. This operating mode is intended to filter noise and improve detection performance compared with transient hydride-generation approaches. A typical listed sample throughput is 60 samples per hour with three analyses per sample. The configuration is intended for repetitive trace-element workflows requiring rapid hydride generation and consistent signal delivery.

Product Type: Continuous-Flow Hydride Generator
Model: HG3000PII
Target Elements: Sb, As, Bi, Ge, Pb, Se, Te, Ti
Mercury Analysis: Cold Vapor
Concentration Capability: ppb Range
Typical Throughput: 60 Samples/h
Replicates In Throughput Example: 3 Per Sample

Continuous-Flow Hydride Generation
Signal Integration
Noise Reduction
ppb-Level Analysis
Cold-Vapor Mercury Capability
High Sample Throughput