Capintec CAPTUS 600 Thyroid Uptake System, Capintec, Inc (CAT#: STEM-GLEPO-0758-ZJF)

The manufacturer of the Capintec CAPTUS 600 Thyroid Uptake System is Capintec, Inc.
The CAPTUS 600 Thyroid Update System is to be used for performing Thyroid Uptake, Thyroid Bioassay, Wipe Test, Blood Volume Test, Shillings Test and RBC Survival Test. The CAPTUS 600 also performs Pulse Height Analysis, Isotope Identification, Radiosotope Decay Corrections, Efficiency Calculations, and maintains appropriate storage and retrieval files for reference data and patient demographic data.
The pre-owned products will be thoroughly cleaned and fully tested to perform at manufacturer specifications before shipping.

Condition: Certified Pre-Owned
Electrical: 115V, 50/60Hz, 25W
Display: blue LCD with cold cathode lamp, backlit,2.36" (6 cm) x 4.72" (12 cm), resolution 128 x 256pixels
Detector: 2" x 2" NaI(Tl) crystal with collimator and shielding
Pulse-height analyzer: 256 channels / 4 ranges (1, 2, 4, 8 keV/ch) / Automatic self calibration / Linearity: within 2% full scale / Differential linearity: 2% SD / A-to-D conversion time: 35 µsec / Low-energy discrimination level: 20 keV or 5 channels / ROI: automatic or manual background subtraction and Mean energy calculation via curve fitting linear -- Display: automatic or manual
Readout device: 10 lbs (4.5 kg), 6.5" (16.5 cm) high,10.5" (26.7 cm) wide, 14" (35.6 cm) deep
Printer: 10 lbs (4.5 kg), 3.2" (8.1 cm) high,14.2" (36.0 cm) wide, 10.8" (27.4 cm) deep
Power: Standard: 115V 3A 50/60Hz Optional: 220V 1.5A 50/60Hz (with circuit protection, line filter, isolation transformer)

The CAPTUS 600 contains a 256 channel microcontroller based pulse height analyzer.
Lower level discriminators are selectable and the firmware permits predefined or selectable ROl's (maximum width of 256 channels).
The LCD displays alphanumeric data, live spectra, and graphics.
Corrections are automatically calculated for dead time loss.
Real time and live time may be displayed.
Coarse high voltage adjustments are made from analog controls at the back of the console.
Fine high voltage adjustments and all other parameters are controlled through the keypad.
In excellent condition, thoroughly cleaned, fully tested to perform at manufacturer specifications.

HEKA InstruTECH LIH 8+8 Data Acquisition System, Unknown
Parts For Array-It SpotBot 3, Array-It Corporation
Millipore MultiScreen HTS Vacuum Manifold, Millipore
Custom Automated Casting Equipment, Unknown