BioRad PTC 200, Bio-Rad (CAT#: STEM-PEPO-0013-ZJF)

The BioRad PTC 200 is manufactured by Bio-Rad.
The BioRad PTC-200 is a traditional Thermal Cycler is built on the old MJ Research platform. The flexible design of this thermo cycler has the ability to use a variety of alpha blocks configured for different microplates, tubes and slides.

Condition: Certified pre-owned
Thermal range:  : -5 degrees to 105C, but no more than 30C below ambient temperature
Accuracy:  ±0.3C of programmed target @ 90C, NIST-traceable
Thermal homogeneity: ±0.4C well-to-well within 30 seconds of arrival at 90C (for most Alpha units; see specifications for individual Alpha units)
Ramping speed:  : Up to 3C/sec for all single- and dual-block Alpha units; 1.2C/sec for the Twin Tower
Displays: One 20 x 4 LCD alphanumeric display
Ports:  : One 25-pin 8-bit parallel interface printer port One 9-pin RS-232 serial port for printer or remote use One IEEE-488 bidirectional general-purpose interface bus 
Memory:  : 200 typical programs in up to 12 individual folders
Sample capacity:  : Varies with installed Alpha unit
Alpha Block Specs:
96-Well Single: Holds 96 x 0.2ml tubes, one 96 well plate or up to 30 0.5ml tubes
Gradient Capable: Yes
Heated Lid: Yes
Power: 100-240v, 50/60hz, 850 watts
Dimensions: 14x9x10 in
Weight: 20 lbs
Warranty: 90-day warranty (US and Canada ONLY)

Peltier thermocycler with a heated lid
96V Alpha unit holds 96 x 0.2ml tubes or one 96-well microplate
RS232, IEEE-488, and parallel printer ports
Fully re-furbished, calibrated to manufacturer standard.
Certified with 90-day warranty (US and Canada ONLY)

MultiMACS X Cell Separator, Miltenyi Biotec
BioRad PTC 200, Bio-Rad
BioRad Tetrad 2 PCR Machine, Bio-Rad