BIO-RAD PTC 200, -5 to +105°C In Pleasanton, CA, USA (CAT#: STEM-PCREPO-0098-YJL)

BIO-RAD PTC 200, -5 to +105°C In Pleasanton, CA, USA, model PTC 200, is manufactured by Bio-Rad biotechnology & life science.
The BioRad PTC-200 is a traditional Thermal Cycler is built on the old MJ Research platform. The flexible design of this thermo cycler has the ability to use a variety of alpha blocks configured for different microplates, tubes and slides. The easy to use Bio Rad PTC-200 PCR system includes a built-in gradient feature which works exclusively with 96 well block. System comes with built-in protocols used for ramping and cooling, along with additional memory banks for user to build their own PCR run.

Condition: Used
Chassis: aluminum
Dimensions(L x W x H): 42 x 23 x 24 cm
Weight: 14 kg
Compressor: 1/12 HP
Refrigerant: CFC 12
Heat exchanger: stainless steel
Operating range: 5 C-25 C
Cooling rate: 0.75 C/minute from ambient to 14 C
Cooling capacity: 75 watts at 14 C
Input voltage range: 90-132 VAC/47-63 Hz/4 amps ; 198-264 VAC/47-63 Hz/2 amps
Fuses: 6.3 amp Slow-Blow(100/120V) ; 3.0 amp Slow/Blow(220/240V)

–Peltier thermocycler with a heated lid
–96V Alpha unit holds 96 x 0.2ml tubes or one 96-well microplate
–RS232, IEEE-488, and parallel printer ports

Bio-Rad S1000, 50–60Hz In Rocklin, CA, USA (CAT#: STEM-PCREPO-0087-YJL)
Bio-Rad Laboratories Bio-Rad S-1000 PCR, 50–60 HZ In Pleasanton, CA, USA (CAT#: STEM-PCREPO-0089-YJL)
Bio-Rad Laboratories Bio-Rad C-1000 PCR, 50–60 HZ In Pleasanton, CA, USA (CAT#: STEM-PCREPO-0090-YJL)
Bio-Rad S1000 Thermal Cycler, 50–60 Hz In Ramsey, MN, USA (CAT#: STEM-PCREPO-0091-YJL)
Bio-Rad C1000 Thermal Cycler, 50–60 Hz In Ramsey, MN, USA (CAT#: STEM-PCREPO-0092-YJL)
BIO-RAD ICYCLER, 4° to 100°C In Pleasanton, CA, USA (CAT#: STEM-PCREPO-0093-YJL)