Beckman SW41Ti Beckman, 41,000 rpm In New Jersey, USA (CAT#: STEM-LCPO-0169-YJL)

Beckman SW41Ti Beckman, 41,000 rpm In New Jersey, USA, model SW41Ti, is manufactured by Beckman - Coulter general laboratory equipment.
SW-41TI 41000 RPM ROTOR Beckman ROTOR Beckman 103.0 Buckets, used, as-is

Condition: Used
Ventilation clearances required: 7.6 cm (3.0 in) Sides and Rear
Humidity restrictions: < 80% (noncondensing)
Ambient temperature range: 4 to 35°C ambient
Speed range: 500 to 14,000 rpm
Set time: to 30 min, continuous run (8), or pulse (short run)
Set temperature: -10 to +40°C in 2°C increments
Noise level 1 meter in front of centrifuge: 58 dBA
Maximum heat dissipation into room under steady-state conditions: 0.63 kW (2,150 Btu/hr)
Approximate deceleration time: 19 seconds from max speed
Approximate acceleration time: 18 seconds to max speed
Weight: 96 lbs
Dimensions: 23 x 15 x 12
Power: 120V, 7amp
Maximum speed: 14,000 rpm
Maximum rcf: 21,920
Maximum capacity: 30 x 1.5 – 2.0 mL
Dimensions (W x H x D): 36.5 x 30 x 58.5 cm

Beckman Rotor Type 35, 35,000RPM In Frederick, MD, USA (CAT#: STEM-LCPO-0319-YJL)
Beckman TLA-110 Fixed Angle Rotor (366735), 110,000 rpm In Ramsey, MN, USA (CAT#: STEM-LCPO-0320-YJL)
Beckman TLA-100.3 Fixed Angle Rotor (349490), 100,000 rpm In Ramsey, MN, USA (CAT#: STEM-LCPO-0321-YJL)
Beckman GS-15 Benchtop Centrifuge with Fixed Angle Rotor, 14,500 rpm In Stanwood, WA, USA (CAT#: STEM-LCPO-0322-YJL)
BECKMAN SW 41 ROTOR, 41,000 rpm In Pleasanton, CA, USA (CAT#: STEM-LCPO-0323-YJL)
Beckman Rotor JA-20 8x50 ml, 20,000 RPM In Los Angeles, CA, USA (CAT#: STEM-LCPO-0324-YJL)
Beckman Microplus 362394 In Lorton, VA, USA (CAT#: STEM-LCPO-0325-YJL)