Beckman Instruments AirFuge 340400 Air-Driven UltraCentrifuge, 80,000 to 110,000 RPM In Elkin, NC, USA (CAT#: STEM-LCPO-0275-YJL)

Beckman Instruments AirFuge 340400 Air-Driven UltraCentrifuge, 80,000 to 110,000 RPM In Elkin, NC, USA, model AirFuge 340400, is manufactured by Beckman - Coulter general medical equipment.
Item AS-IS. The pressure gauge does not move while item is on. Minor scratches to item.

Condition: Used
Manufacturer: Beckman Coulter
Model: Diffusion Pump
Dimensions (DxL): 6 x 14 in.
Opening: 3.25 in.

8 X 11 X 15 Inch Dimensions, 10.4 kg
30 to 60 secs Approximate acceleration time
2.5 to 5.5 min Approximate deceleration time
50 Hz, 100 or 220 to 240 V AC; 60 Hz, 120 V AC Electrical requirements
Set time- to 5 hr in 5 min increments or continuous (hold)
2° Pollution
Coated polycarbonate control panel
Urethane paint top surface
General purpose paint
3 Inch Both sides and rear ventilation clearances required
Eliminate the need for lipemic sample send-outs
The easy-to-operate tabletop centrifuge- reaches top speed in only 30 seconds, decelerates smoothly to keep sample contents separated
Offers timed runs up to five hours with hold position for long runs, operates near ambient teperature
The Airfuge air-driven ultracentrifuge offers enhanced versatility with a variety of rotors- batch rotor pellets particles from a large sample
Electron microscopy rotor sediments particulates from very small volumes on to supports suitable for insertion into an electron microscope
Four fixed angle rotors generate the high speeds and forces necessary to perform a variety of tasks

Beckman L7-75 Ultracentrifuge, 208-240 volt In Ramsey, MN, USA (CAT#: STEM-LCPO-0261-YJL)
Beckman L7-65 Ultracentrifuge, 65,000 rpm In Ramsey, MN, USA (CAT#: STEM-LCPO-0262-YJL)
Beckman L8-70M Ultracentrifuge, 1000-7000 RPM In Ramsey, MN, USA (CAT#: STEM-LCPO-0264-YJL)
Beckman L8-80M Ultracentrifuge, 80,000 rpm In Ramsey, MN, USA (CAT#: STEM-LCPO-0265-YJL)
Beckman L-80XP Ultracentrifuge, 80,000 rpm In Ramsey, MN, USA (CAT#: STEM-LCPO-0266-YJL)
Beckman J2-MI Centrifuge, 100 to 21,000 rpm In Ramsey, MN, USA (CAT#: STEM-LCPO-0270-YJL)
Beckman J2-HC Centrifuge In Ramsey, MN, USA (CAT#: STEM-LCPO-0271-YJL)