Beckman GS-15 Benchtop Centrifuge with Fixed Angle Rotor, 14,500 rpm In Stanwood, WA, USA (CAT#: STEM-LCPO-0322-YJL)

Beckman GS-15 Benchtop Centrifuge with Fixed Angle Rotor, 14,500 rpm In Stanwood, WA, USA, model GS-15, is manufactured by Beckman - Coulter laboratory centrifuges.
The Beckman GS-15 is a compact bench-top centrifuge that is highly versatile and a workhorse in the industry. It is capable of operating with both fixed angle and swinging bucket rotors. As a result the GS-15 can process large quantities of sample quickly.
This GS-15 is in premium condition and comes complete with a 36 place fixed angle rotor (model F3602) for 1.5-2 mL microfuge tubes.

Condition: Used
Technical Specifications: BioLogic DuoFlow Systems
Flow rate limit: 10 ml/min 20 ml/min; optional Maximizer valve system
Pressure limit: 3,500 psi (23 MPa) at 10 ml/min
UV Detection: Standard 254 and 280 nm filters; optional 214, 365, 405, 436, and 546 nm filters; standard 5 mm analytical flow cell; optional 2 mm preparative flow cell; optional BioLogic QuadTec UV/Vis detector, 4-wavelength simultaneous detection
Conductivity: Standard
pH detection: Optional
Other detectors: Optional signal import module (SIM), adds pH, refractive index, and fluorescence detectors
Buffer selection/large sample loading: Optional SV5-4 buffer-select valve, Model EP-1 Econo pump or Econo gradient pump
Sample injection: AVR7-3 valve
Multiple sample injection: Optional DynaLoop sample loops; 25 ml, 90 ml
General fraction collection: BioFrac or Model 2110 fraction collector
Large-volume fraction collection: BioFrac fraction collector with optional prep adaptor or AVR9-8 valve
Small-volume fraction collection: BioFrac or Model 2110 fraction collector
Buffer blending: Optional Maximizer valve system
Column scouting/column switching: Optional AVR9-8 valves for =8 columns or additional AVR7-3 valve for 2 columns
Reverse-flow chromatography: Additional AVR7-3 valve
Solvent Compatibility: All commonly used chromatographic solvents
Operating temperature: 4–40°C
Dimensions (W x D x H): 35 x 41 x 81 cm (13.8 x 16 x 31.8")
Weight: 70 kg (154 lb)

Safety features including: over-temperature, imbalance and over-speed sensors.
Steel barrier ring around chamber.
Quiet operation
Low maintenance
Pre-set run times
Smooth operation with brushless induction drive
Choice of ramping rates to protect delicate gradients
Diagnostic displays right on the front panel.

Beckman MLS-50 Ultracentrifuge Rotor (367280), 50,000 rpm In Ramsey, MN, USA (CAT#: STEM-LCPO-0305-YJL)
Beckman MLA-130 Ultracentrifuge Rotor (367114), 130,000 rpm In Ramsey, MN, USA (CAT#: STEM-LCPO-0306-YJL)
Beckman MLA-80 Ultracentrifuge Rotor (367096), 80,000 rpm In Ramsey, MN, USA (CAT#: STEM-LCPO-0307-YJL)
Beckman Centrifuge Rotor Model JS-13.1, 13,000 rpm In Vista, CA, USA (CAT#: STEM-LCPO-0314-YJL)
Beckman Centrifuge Rotor Model JA-10, 10,000 rpm In Vista, CA, USA (CAT#: STEM-LCPO-0315-YJL)
Beckman Centrifuge Rotor Model JA-25.50, 25000 RPM In Vista, CA, USA (CAT#: STEM-LCPO-0316-YJL)