Beckman Delsa Nano S In New Jersey, USA (CAT#: STEM-AIPO-0256-YJL)

Beckman Delsa Nano S In New Jersey, USA, model Nano S, is manufactured by Beckman - Coulter general laboratory equipment.
C Particle Analyzer used nice

Condition: Used
Electrical: 120V, 12A, 60Hz
Height: 53.3 cm (21 in)
Depth: 58.4 cm (23 in)
Weight: 81 kg (178 lb)
Approximate Acceleration Time: 10 acceleration profiles–9 slow rates from 0 to 5,000 rpm followed by full acceleration to set speed; or maximum acceleration
Approximate Deceleration Time: 11 deceleration profiles–10 slow rates from 5,000 to 0 rpm, including coasting to a stop without brake; or full dynamic braking from set speed
Maximum Heat Dissipation into
Room under Steady-State Conditions: 0.5 kW (1,750 Btu/hr)
Noise Level 1 Meter in
Front of Centrifuge: < 60 dBA
Set Speed: Actual rotor speed ± 50 rpm of set speed
Set Temperature: 2 to 40°C in 0.1° increments
Set Time: to 99 hr 59 min
Speed Range: 5,000 to 120,000 rpm
Temperature Control: ± 2°C of set temperature (after equilibration)
Ambient Temperature Range: 15 to 35°C ambient
Clearances Required: 7.6 cm (3.0 in) both sides and rear
Humidity Restrictions: < 95% (noncondensing
Pollution Degree: 2
Time – Actual Display: Indicates run time remaining

Provides accurate size measurements in the range from 0.6 nm to 7 μm
Sample concentration ranging from 0.001% to 40%

Beckman LS I3 In New Jersey, USA (CAT#: STEM-AIPO-0257-YJL)
Beckman Delsa NANO C In New Jersey, USA (CAT#: STEM-AIPO-0258-YJL)
Beckman Coulter Z1 S Coulter Particle Counter (Laboratory), 2-60% In Elkin, NC, USA (CAT#: STEM-AIPO-0265-YJL)
Beckman Coulter LS13-320MW (Multi Wavelength), 10 °C to 40 °C In United States (CAT#: STEM-AIPO-0268-YJL)