Inquiry Basket

Analysis of 2,5-dihydroxybenzoic acid by matrix-assisted laser desorption/ionization mass spectrometry (CAT#: STEM-ST-0300-LJX)

Name: Analysis of 2,5-dihydroxybenzoic acid by matrix-assisted laser desorption/ionization mass spectrometry
SKU: STEM-ST-0300-LJX
Rating: 5 (1 reviews)

Introduction

Selected benzoic acid derivatives and related substances were used as additives to 2,5-dihydroxybenzoic acid (2,5DHB) and the performance of the mixtures in matrix-assisted laser desorption/ionization mass spectrometry was investigated. Using benzoic acid derivatives substituted at position 2 and/or 5 or related substances as a co-matrix in the 1–10% range with 2,5DHB results in improved ion yields and signal-to-noise ratio of analyte molecules, especially for the high-mass range. The enhanced performance is prominent for 2-hydroxy-5-methoxybenzoic acid and exists for both proteins and oligosaccharides. It is suggested that the improvement is caused by a disorder in the 2,5DHB crystal lattice allowing ‘softer’ desorption.

Buy Now

Principle Applications Procedure Materials Notes

Principle

In a very small area and a very short time interval (ns order of magnitude), the laser delivers high-intensity pulse energy to the sample under test, causing it to desorption and ionize instantaneously without thermal decomposition. MALDI is a mass spectrometry ionization method for direct evaporation and ionization of non-volatile samples.

Applications

For measuring the molecular weight of biological macromolecules, such as the molecular weight distribution of peptides, proteins, nucleic acids, polymers and oligomer analysis.

Procedure

1. Mix the sample with the appropriate matrix material and load it onto the metal plate.
2. Pulsed laser light is used to irradiate the sample and trigger ablation and desorption of the sample and matrix materials.
3. Analyte molecules are ionized by protonation or deprotonation in the thermal plume of the ablated gas and are then accelerated to a mass analyzer for analysis.

Materials

• Sample Type:
2,5-dihydroxybenzoic acid

Notes

1. During shutdown, if the nitrogen is not turned off, the pressure should be properly lowered to avoid moisture.
2. Keep an eye on instrument drift during manual measurement. If there is drift, the instrument needs to be calibrated with standard peptide or standard protein.

Other recommended products

Routine Identification of Bacteria by Matrix-Assisted Laser Desorption Ionization Time-of-Flight Mass Spectrometry (CAT#: STEM-ST-0297-LJX)
Identification of Mycobacteria by Matrix-Assisted Laser Desorption Ionization-Time-of-Flight Mass Spectrometry (CAT#: STEM-ST-0318-LJX)
Analysis of synthetic polymers by UV-matrix-assisted laser desorption/ionization mass spectrometry (CAT#: STEM-ST-0298-LJX)
Real-Time Identification of Bacteria and Candida Species in Positive Blood Culture Broths by Matrix-Assisted Laser Desorption Ionization-Time of Flight Mass Spectrometry (CAT#: STEM-ST-0329-LJX)
Determination of the fatty acid composition of saponified vegetable oils by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (CAT#: STEM-ST-0328-LJX)
Identification of Staphylococcus aureus and Determination of Its Methicillin Resistance by Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry (CAT#: STEM-ST-0322-LJX)
Dermatophyte Identification by Matrix-Assisted Laser Desorption Ionization–Time of Flight Mass Spectrometry (CAT#: STEM-ST-0327-LJX)
Rapid Detection of Resistance against β-Lactam Antibiotics by Matrix-Assisted Laser Desorption Ionization–Time of Flight Mass Spectrometry-Based Functional Assay (CAT#: STEM-ST-0330-LJX)

We use cookies to understand how you use our site and to improve the overall user experience. This includes personalizing content and advertising. Read our Privacy Policy

Accept Cookies