Allegro™ Jacketed Totes (CAT#: AM-BP-0851-LC)

Pall Allegro jacketed totes are specifically designed and manufactured to deliver the latest performance of disposable systems in thermal control applications. Jacketed tote is part of Pall Life Sciences' Allegro platform; a comprehensive program that provides process solutions, technical support and verification for disposable systems. Provide fully integrated multi-component and multi-technology systems as a proven fluid handling solution.

Tote: 304/304L/1.4301/1.4306/1.4307 stainless steel or higher
Typical Heat Transfer Coefficient1: 330 W/m²/°C
Pressure Vessel Design: Full Vacuum/6 barg
Temperature Design: -10 to 100 °C
Operating Temperature : 0 to 70 °C
Typical Flowrate for Jacket : 2 m³/hr (33 L/min)
Pressure Drop
200 L tote: < 0.7 bar (at typical flowrate)
500 L tote: < 1.0 bar (at typical flowrate)
Surface Finish Internal: Ra < 0.5 μm
External: 2B-surface oscillated, pickled and weld brushed
Weight (empty)
200 L tote: 90 kg
500 L tote: 230 kg
Weight (full)
200 L tote: Approx. 296 kg (assuming full biocontainer and heating/cooling fluid)
500 L tote: Approx. 742 kg (assuming full biocontainer and heating/cooling fluid)
Inlet/Outlet/Drain: 1 in. sanitary Connections
Dimensions (L/H/W)² including inlet/outlet/drain:
200 L tote: 876 mm x 833 mm x 646 mm
500 L tote: 1300 mm x 922 mm x 888 mm

Dimension is same with standard Allegro 3D totes
Sanitary nozzle connections for inlet, outlet and low point drain for heating/cooling liquid
Allegro wheeled trolleys from Pall increase mobility
Can be used in conjuncion with existing totes to maximize floor space
Passivated stainless steel surface provide enhanced resistance to corrosion
Jacketed on 4 sides, including the bottom, to maximize thermal transfer
Insulated with NH/Armaflex® thermochannels on all jacketed faces fto conserve heat and protect person
Good internal surface finish (Ra < 0.5 μm) maximize contact, realizing efficient thermal transfer.