DASGIP® Parallel Bioreactor System for phototrophic cultivation, max. 50 sL/h gassing, including LED illumination devices, 8-fold system with DASGIP® Bioblock, Eppendorf (CAT#: AM-AUTO-0374-LY)

The DASGIP® Parallel Bioreactor System for phototrophic cultivation, max. 50 sL/h gassing, including LED illumination devices, 8-fold system with DASGIP® Bioblock is manufactured by Eppendorf. The DASGIP parallel bioreactor system is used for cell culture and microbiology R & D and process development, allowing advanced biological process control and automation. Parallel processing, precise control of all relevant parameters, user-defined profiles and countless automation features have led to fast and efficient process development. DASware software solutions support DoE, process historians, and comprehensive data management. Configurable solutions address the unique requirements of microbial, phototrophic, mammalian and human cells, stem cell applications, and biofuel and biopolymer processes.

Number of parallel units: Up to 16
Software: DASware control, other DASware optional
User Interface: Process computer with monitor
Typical power consumption (4-fold system without process computer): 490 W (at 230 V)/441 W (at 115 V) (605 W/561 W without DASGIP Bioblock)
Dimensions (W × D × H, 4-fold system without process computer): 140 x 70 x 53 cm (55 x 28 x 21 in)
Typical weight (4-fold system without accessories): 77 kg (59 kg without DASGIP Bioblock)
Vessels: Glass vessels
Sterilization: Autoclavable
Total volume: 1.9 L / 3.0 L
Drive: Direct overhead drives
Speed ranges: 30 – 1,250 rpm (standard)/100 – 1,600 rpm (optional)
Impellers: Pitched-blade
Gas supply: TMFC; overlay and/or sparger
Standard gas flow rates: 0.5 – 250 sL/h, 0.5 – 150 sL/h CO2(DASGIP MX4/4H, other modules available)
Standard gas mixing: Air, N2, O2 and/or CO2
Feed lines per vessel: Up to 8
Standard feed rates (depending on tube diameter): 0.3 – 9.5 mL/h to 13 – 420 mL/h (DASGIP MP8) 10 – 70 mL/h to 0.4 – 5 L/h (DASGIP MP4)
Temperature control: Heat blankets (optional cooling fingers)/ heating and cooling integrated in DASGIP Bioblock (additional cooling fingers optional)
Standard temperature range (at 25° C room temp.): 5 K above cooling agent temperature – 60°C/ 5 K above cooling agent temperature – 99°C (DASGIP Bioblock)
pH control: CO2/base, and other set-ups
DO control: Cascade (O2 concentration, gas flow rate), and other set-ups
ORP (redox) measurement: Optional
Level/foam: Optional
OD measurement: Optional (DASGIP OD4)
Exhaust condensation: Water-cooled
Exhaust analysis: Optional (DASGIP GA4)