Automatic Plate Coating Machine, MedicaTec (CAT#: AM-AUTO-0295-LY)

The Automatic Plate Coating Machine is manufactured by MedicaTec. It has the ability to process 96 holes at the same time, and can set the suction / exhaust speed (10 μ l-400 μ L / sec), 20 micro plates automatic feeding / storage mechanisms, and can add micro plates at any time during the processing. Suitable for all kinds of liquid transfer needs.

Operating environment: 10 ~ +50 degrees (no condensation), humidity below 85%
Drop method: 96-well independent syringe
Handling microplates: a variety of 96-well microplates
Processing speed: about 14 seconds / block (@100μL contact drop)
Dropping accuracy: CV is within 1% (@100μL drops)
Microplate supply/recycling: 20 microplate automatic feeding mechanism (microplate can be added in the middle of processing)
Dimensions: 490 (W) × 450 (D) × 354 mm (H)
Weight: about 30Kg
Power supply: AC220V, 150VA

Pipetting error ≤ ±1% (If your drop volume is 50μL, the error between holes will be less than 1μL)
The amount of pipetting can be set between 1μL-20μL/10μL-300μL
Processing speed is approximately 14 seconds per block
96 holes are processed at the same time, the speed of aspirating/discharging can be set (10μL-400μL/sec)
20 microplate automatic feeding/storage mechanisms (you can add microplates at any time during processing)
Steel needle structure liquid head can save the cost of disposable tip and cumbersome loading; liquid head disassembly is easy to clean