Agilent 1100 Series - G1321A HPLC Fluorescence Detector, Agilent Technologies (CAT#: STEM-C-0039-LGZ)

The manufacturer of Agilent 1100 Series - G1321A HPLC Fluorescence Detector is Agilent Technologies. Model is 1100 Series - G1321A. High-sensitivity multisignal detection, online fluorescence spectra, straightforward Operation and maintenance, and built-in features for GLP compliance are provided by agilent 1100 series fluorescence detectors.

Condition: used
Detection type: Multisignal fluorescence detector with rapid online scanning capabilities and spectral data analysis
Performance: 10 fg anthracene LOD, Ex 250 nm, Em 400 nm, Raman (H20) >400 Ex 350 nm, Em 397 nm, dark value 450 nm, standard flow cell
Light source: Xenon flash lamp, normal mode (20W) and economy mode (5W)
Pulse frequency: 296 Hz for signal mode, 74 Hz for economy mode
Excitation monochromator: Concave holographic grating, F/1.6, blaze 300 nm, range 200—700 nm and zero-order, bandwidth 20 nm
Emission monochromator: Concave holographic grating, F/1.6, blaze 400 nm, range 280—900 nm and zero-order, bandwidth 20 nm
Reference system: Inline excitation measurement
Time programing: Up to 4 signals, response time, PMT gain, baseline behaviour (append, free, zero), spectral parameters
Spectral acquisition: Excitation or emission spectra, scan speed 28 ms per datapoint, e.g. 0.6 s per spectrum 200—400 nm, 10 nm step
Step size: 1—20 nm
Spectra storage: Limited only by disk space
Wavelength repeatability: ±0.2 nm
Wavelength accuracy: ±3 nm
Flow cells: Standard: 8 µL volume, 20 bar (2 MPa) pressure maximum, quartz
Control and data evaluation: Agilent ChemStation for HPLC or Agilent 1100 Series control module with limited spectral data analysis and printing of spectra
Analog outputs: Recorder/integrator: 100 mV or 1 V, output range >102 luminescence units, 2 outputs
Communications: Controller-area network (CAN), HP-IB, RS-232C, LAN, APG Remote: ready, start, stop and shut-down signals
Safety and maintenance: Extensive diagnostics, error detection and display (through control module and ChemStation), leak detection, safe leak handling, leak output signal for shutdown of pumping system. Low voltages in major maintenance areas.

1. Simplify optical design and optimize baseline stability. Optimized sensitivity and selectivity provide reliable quantitative and qualitative information.
2. High sensitivity xenon lamp, long life.
3. Variable mode monochromator: used for selective multi-signal detection and online spectrum acquisition.
4. Easy to front to flow tank: quick check or exchange

Waters 480 HPLC UV Detector, Waters Corporation(CAT#-STEM-C-0106-LGZ)
Waters Acquity QDa Mass Detector, Waters Corporation(CAT#-STEM-C-0133-LGZ)
Waters Acquity TUV Detector UPLC TUV Detector, Waters Corporation(CAT#-STEM-C-0136-LGZ)
Pharmacia Optical Unit UV-1 FPLC UV Detector, Pharmacia Fine Chemicals(CAT#-STEM-C-0249-LGZ)
Precision Detectors PD2123 HPLC Absorbance Detector, Thermo Fisher Scientific(CAT#-STEM-C-0253-LGZ)
Dionex RI-101 HPLC Refractive Index Detector, Dionex Corporation(CAT#-STEM-C-0266-LGZ)