AccuPyc II HP 1340 High Pressure Pycnometer, Micromeritics Instrument Corporation (CAT#: STEM-LE-0436-LC)

The AccuPyc II HP 1340 High Pressure Pycnometer features a sample capacity of 100 cm3 for determination of the true volume and density of solids and powders at high pressures up to 500 psi.

Accuracy: To within 0.1% of reading, plus 0.1% of sample capacity
Sample Volume: 100 cm3
Type: High Pressure Analyzer
Precision: Reproducibility within ± 0.04% nominal, full-scale cell chamber volume.

Two independent modules, one for keyboard control and the other for analysis. Cable is provided for connection between two modules
The sample chamber can hold samples up to 48mm in diameter and 60mm in length
Ensure reproducibility within 0.04% of full scale
Transducer zeroing, calibration and operation are controlled by internal computer
Supports direct connection to the analytical balance to transfer sample mass without errors
Programmable for automatic repeat measurement or data acquisition within the tolerance range selected by the user
User programmable number of cleanups before analysis
The ASCII output from the serial port can be captured by a computer and used as input to popular spreadsheet programs

AccuPyc II 1340 Pycnometer, DVVA 4000 Dynamic Void Volume Analyzer 4000, GeoPyc 1365 Envelope Density Analyzer