2535 Quaternary Gradient Module with Waters FlexInject Module, Waters (CAT#: STEM-CPO-0718-ZJF)

The manufacturer of the 2535 Quaternary Gradient Module with Waters FlexInject Module, Waters is Waters.
Refurbished Waters 2535 Quaternary Gradient Module (p/n 186004557) with Waters FlexInject module. The Waters 2535 is a four solvent, low pressure mixing gradient pump (up to 50 mL/min) that serves as a solvent delivery device for purification systems. Dual programmable flow paths enable the system volume to change when the column size is changed.

Condition: Refurbished, Certified Pre-owned
Power: 100/240V ±10%, 50/60Hz, 6.5A
Power consumption: 650 W
Fuse: 10A, 5 x 20 mm, slow-blowing, IEC type
Operating temperature: 4 – 40°C (39.2 – 104°F)
Operating humidity: 10 – 90%, non-condensing
Dimensions: 11" W x 26" D x 17" H (28 x 66 x 43.2 cm)
Weight: 87 lbs. (39.5 kg.)

Four-solvent gradient selection
Two fluidic pathways (small scale and large scale) to accommodate column selection and chromatographic efficiency
Control from MassLynx™ or Empower™ software, or console allowing scale up via a familiar software interface
Interfaces to a variety of detectors and peak fraction collectors for optimum purifications
Allows UV- or MS- directed purification with MassLynx Software
Leak detection is standard
50 mL/min capability for using columns up to 30 mm I.D. for pruification of milligrams of material
Many optional shelf units, degassers, splitters, and accessories to customize any system
High pressure operation @ 6,000 psi (414 bar) to accommodate a wide variety of column lengths, diameters, and particle sizes

2489 UV/Visible Detector, Waters
2690 Separations Module and Waters 2690 Alliance Column Heater, Waters
2695/2795 Parts, Waters