V100 Automatic Karl Fischer Moisture Analyzer, Determination Range 0.005-100%, SHANGHAI PEIOU ANALYSIS INSTRUMENT CO.,LTD (CAT#: STEM-AIAE-3390-LGZ)

Gasoline, water pressure oil, insulation oil, transformer oil, turbine oil, fuel resistant.
Ethane, dimethylbutane, octane, dodecane, eicosane, cyclododecane, accelerated butadiene, benzene, toluene, xylene, ethyl toluene, dimethyl polystyrene, tetracene, petroleum ether, cyclohexylamine, methylcyclohexylamine, cycloheptane, ethylene cyclohexylamine, benzene, methylene phenanthrene, isomethyl isopropyl benzene, etc.
Phenolic phenol, cresol, fluorophenol, chlorophenol, dichlorophenol, nitrophenol, etc.
Diethylene glycol monomethyl ether, polyethyl diether, anisole, anisole iodide, diheptaneether;
All alcohols, all halogenated hydrocarbons, all lipids, etc.

Applicable standards:
GB3727 "Determination of trace moisture in ethylene and propylene for industrial use"
GB6023 "Determination of trace water in butadiene for industrial use by Karl Fischer method"
GB6283 "Determination of water content of chemical products by Karl Fischer method (General method)"
GB18619 "Determination of Moisture Content in natural gas Karl Fischer method", et al.

Karl Fischer Moisture Analyzer Content Determination Range: 0.005-100%
Measurement resolution: 1ug (titration accuracy 0.001ml, 1mg/ml Karl Fischer reagent)
Measurement repeatability: ≥99.7%
Maximum possible error: ±0.3%
Delay setting: Delay titration: can be customized
End point delay: can be customized
Measurement time: 3 minutes on average
Display: LCD display,
Data storage capacity: 1000 (expandable)
Burette: 20ml high-precision measuring tube assembly, with anti-UV shield
Titration mode: positive titration
Titration method: Various methods can be set
Titration speed: It can be adjusted according to different brands of titration reagents, and various speeds can be selected.
Liquid resistance compensation function: For different solvents and samples, it is not necessary to change the sensitivity and end point detection potential of the detection electrode, and more accurate detection results can be obtained.
With real-time detection function of electrode open circuit and short circuit
Valve and pipeline material: three-way two-way electromagnetic drive control valve
External electrode: double platinum electrode data interface: RS-232
Calculation function: moisture content, statistical calculation, automatic average function of blank value and calibration value.
Record analysis: The instrument itself can store at least 500 sets of analysis results.
External high-speed needle-type micro-printer, beautiful and fast printing, printing results can be stored for a long time (optional)
Ambient temperature: +5-40°C
Operating environment humidity: ≤80%
Power: 220V/50HZ

Drugs: antibiotics, chemically synthesized drugs and intermediates
Organic chemicals for pharmaceutical preparations: hydrocarbons, alcohols, lipids, aldehydes
Organic acids and inorganic chemicals: salts, acids, bases
Petrochemicals: crude oil, gasoline, motor oil, lubricating oil
Fertilizers: Urea,
Pesticides: pesticides, pesticide emulsifiers
Dyes: brighteners, dyes, dye intermediates
Food and beverage: rice, flour, milk powder, beer.
Surfactants: laundry detergents, detergents, fabric softeners
Cosmetics: facial cleanser, skin cream, hair cream, hand oil, toothpaste

LS-200 Halogen Rapid Moisture Analyzer, Balance Can Read 0.002 G, SHANGHAI PEIOU ANALYSIS INSTRUMENT CO.,LTD (CAT#-STEM-AIAE-3388-LGZ)
LS-300 Halogen Rapid Moisture Analyzer, Balance Can Read 0.001 G, SHANGHAI PEIOU ANALYSIS INSTRUMENT CO.,LTD (CAT#-STEM-AIAE-3389-LGZ)
K200 Automatic Karl Fischer Moisture Analyzer, Measuring Range 0.0001% (1ppm) to 100%, SHANGHAI PEIOU ANALYSIS INSTRUMENT CO.,LTD (CAT#-STEM-AIAE-3391-LGZ)