MaxTester 715B OTDR Fiber Optic Network Tester Power Meter MAX-715B-M1, Exfo (CAT#: STEM-AIAEPO-0767-ZJF)

The manufacturer of the MaxTester 715B OTDR Fiber Optic Network Tester Power Meter MAX-715B-M1is Exfo.
Fully featured, entry-level, dedicated OTDR with tablet-inspired design perfect for frontline singlemode fiber installers.

Condition: Certified Pre-owned
Display: 7-in (178-mm) outdoor-enhanced touchscreen, 800 x 480 TFT
Interfaces: Two USB 2.0 ports RJ45 LAN 10/100 Mbit/s
Storage: 2 GB internal memory (20 000 OTDR traces, typical)
Batteries: Rechargeable lithium-polymer battery; 12 hours of operation as per Telcordia (Bellcore) TR-NWT-001138
Power supply: Power supply AC/DC adapter, input 100-240 VAC, 50-60 Hz, 9-16 V DCIN 15 Watts minimum
Wavelength (nm): 1310 ± 30/1550 ± 30/1625 ± 10
SM live port built-in filter: 1625 nm: highpass >1595 nm, isolation >50 dB from 1270 nm to 1585 nm
Dynamic range (dB): 30/28/28
Event dead zone (m): 1
Attenuation dead zone (m): 4
Distance range (km): 0.1 to 160
Pulse width (ns): 5 to 20 000
Linearity (dB/dB): ±0.05
Loss threshold (dB): 0.01
Loss resolution (dB): 0.001
Sampling resolution (m): 0.04 to 5
Sampling points: Up to 256 000
Distance uncertainty (m): ±(0.75 + 0.005 % x distance + sampling resolution)
Measurement time: User-defined
Reflectance accuracy (dB): ±2
Typical real-time refresh (Hz): 3

Handy, lightweight, powerful, tablet-inspired design
7-inch, outdoor-enhanced touchscreen–the biggest in the handheld industry
12-hour autonomy
Tamper-proof password protection
Dead zones: EDZ 1 m, ADZ 4 m
Dynamic range of 30/28/28 dB
Rugged design built for outside plant
iOLM-ready: intelligent and dynamic application that turns complex OTDR trace analysis into a one-touch task

FCS-404-B-ER2 OTDR PC Card, Exfo
MaxTester 715B OTDR iOLM Fiber Optic Network Tester Power Meter MAX-715B-M1, Exfo
SM OTDR FTB-200-V2-S2, FTB-7600E-23B-EI-VFL, 1310/1550nm, 50 db, Exfo